PT3300 Professional Walkie Talkie in Malaysia

●General Functions

16 Channels (15+Scan)
15 communication channels and 1 scan channel provide flexible channel assignments among different user groups.

Multiple Scanning
Scan channel is convenient for the team leader to monitor the on-site situations. The scanning mode and scanning priority is programmable.


Low Battery Alert
When the battery power is low, the working status indicator flashes red, reminding you to recharge or replace the battery.

Time-out Timer (TOT)
When TOT is on and the transmission exceeds the preset time limit, the communication will stop after warning tone. TOT can prevent the radio from any potential damage caused by overlong transmission.

Monitor
To monitor whether the current channel has signal, press the MONI key. The Monitor function is used to receive weak signal.

Wired Clone
To quickly set the parameters on a radio, you can clone the radio data from another radio with the supplied data cable, saving the time of parameter setting.




WARRANTY!
12 Months Warranty for Transceiver.
6 Months Warranty for Standard Accessories.


Authorized Sole Distributor(M) & Service Center
OMTEL COMMUNICATION (001641330-T)
105A, Jalan Jejaka 9, Taman Maluri,Cheras, 55100 Kuala Lumpur.
Tel: (603) 9281 0996
Fax: (603) 9281 0775

For further information please contact:-
Simon LaiManager(Sales & Marketing Division)
H/P: 012-203 1890
Email: simon.lai@omtel.com.my

http://www.kirisun.com/

Kirisun PT3300 Walkie-Talkie

KIRISUN WALKIE-TALKIE

Model : PT3300 (Frequency : 440-480 Mhz)

Advantages

Channel Annunciation
While switching to another channel, the user can hear the voice annunciation of the current channel number.

CTCSS/DCS
38 groups of standard CTCSS and 83 groups DCS are available (PC programmable). Built-in CTCSS/DCS Encoder/Decoder can prevent co-channel interference and unwanted conversations on the same frequency and ensure smooth communication.

High/Low Power Switchable
The user can transmit signals in high or low power according to the actual needs. When in communication, transmitting in low power can reduce power consumption.

Auto Power-saving
Auto power-saving provides longer transmission and stand-by time.10 seconds after no signal or operation, the auto power-saving is activated to minimize power consumption. It resumes to normal mode while receive signals or being operated.

●General Functions

16 Channels (15+Scan)
15 communication channels and 1 scan channel provide flexible channel assignments among different user groups.

Multiple Scanning
Scan channel is convenient for the team leader to monitor the on-site situations. The scanning mode and scanning priority is programmable.


Low Battery Alert
When the battery power is low, the working status indicator flashes red, reminding you to recharge or replace the battery.

Time-out Timer (TOT)
When TOT is on and the transmission exceeds the preset time limit, the communication will stop after warning tone. TOT can prevent the radio from any potential damage caused by overlong transmission.

Monitor
To monitor whether the current channel has signal, press the MONI key. The Monitor function is used to receive weak signal.

Wired Clone
To quickly set the parameters on a radio, you can clone the radio data from another radio with the supplied data cable, saving the time of parameter setting.

Invalid Channel Alert
VOX

Emergency Alarm

Keypad Lockout

Frenquency Range : 440~480 MHz

ChannelCapacity : 15+1
Channel Spacing : 12.5 or 25KHz
Frenquency Stability : 4ppm
operating temperature : -10℃~ +60℃
Operating voltage : 7.5V DC ±20%
Dimension(H×W×D) : 58mm×117mm×35mm
Weight : 225g
Battery : 1100mAh

Reference Sensitivity : ≤0.2μV
Operating Bandwidth : ±7
First IF of Receiver : 45.050MHz
Rated Audio Power : ≥500 mW
Rated Audio Distortion : ≤5%
FM Hum&Noise : 40/35

RF Power
4W/1W/(UHF)
Frenquency modulation : 16KφF3E
Antenna Impedance : 50Ω
Modulation Limiting : ±5KHz@25KHz
Modulation Distortion ; < 5%
Radiated Spurious Emission